Single Axis Tacking for Solar Parabolic Trough System

Submitted by Anonymous on Fri, 2014-09-19 11:09

Specification Sheet for Single Axis Solar Tracking1 .Hydraulic Power Pack or Equivalent·       1 HP × 1440 RPM electric motor for gear pump.·       Ball Housing for alignment.·       Fabricated MS Reservoir.·       Capacity – 44  lit.·       Solenoid Valves mounted  on manifold blocks.·       Hydraulic Cylinders – 2 nos.·       Over centre valves – 2 nos.2 .Solar Tracking Control Board or Equivalent·       Microcontroller.·       8 digital input channels 24v opto-isolated.·       8 digital out channels 24v open collector output.·       3 Analog input channels.·       3 isolated RS485 channels.·       1 non isolated RS232 channel.·       USB port.·       Flash for  data logging.·       Eeprom for parameter storage.·       5 key keypad.·       Battery backed real time clock.·       Power supply.3 .SMPS Board or Equivalent·       Input 85-260V 50/60Hz.·       Input under voltage protection.·       Output  over voltage protection.·       Output short circuit protection.4 .Variable Frequency Drive or Equivalent·       1 HP, Single phase input and 3 Phase output.5 .Inclinometer with RS485 interface.6  .LCD display and Key console (20 characters)

Reference: 
MEE/11-12/281/CSIR/KSRS /XVI
File: 
Single Axis Solar Tracking
Opening Date: 
12/09/14
Closing Date: 
07/10/14
Address: 
Dr.K.Srinivas Reddy Professor #204, Heat Transfer and Thermal Power Laboratory Department of Mechanical Engineering Indian Institute of Technology, Madras- 600 036
Keywords: 
Single Axis Solar Tracking Parabolic Trough Collector
Administrative Unit: 
Department of Mechanical Engineering